The Dehydra Compact food waste dewaterer is an ideal system for high capacity, space restrained kitchens. The unique format of this unit, unlike any other, allows full size wheeled bins to be filled. With the Hydro Extractor system located at head height the wheeled bin can be located right next to the unit. This reduces the need to decant smaller bins into wheeled bins for disposal


Food waste is fed into the hopper by the operator and ground into small particles by the food waste disposer. The operation of the whole unit is quick, simple and safe thanks to a design which prevents access to the grinding mechanism while the unit is operating. The ground food waste is then pumped from the disposer into the hydro-extractor. Combining an auger and a screen with a very fine mesh (1 mm diameter holes) the hydro-extractor separates the liquid from the ground food waste. The excess liquid can then be re-circulated to reduce water consumption before being disposed of to a foul drain. Once the food waste has been disposed of the system automatically self cleans to minimise operator time.


The Compact version of our Dehydra systems as pictured utilises height rather than counter width, allowing the systems to be installed in areas where space is limited. The wastes drop from the dewatering unit from head height, which makes it ideal for filling larger bins, which results in less time spent moving the wastes to your recycling area.


Disposer 2.2kw
Pump & Geared Motor 0.55kw
Hydro Exctractor Dehydra 1.1kw
ACC Feed (3ph 4wire) 400v   -16a
Water Connection Hot   & Cold
Waste Water Connection Required
Weight 150kgs
Overall Dimensions 650W   x 700L x 1900H
Feed Opening Dimensions 530W   x 350H
Capacity Up   to 150kgs per hour
250-400   meals per hour


Water   Connection Inlet: Cold   water supply to disposer shall be 3/4 service line (pressure resistant hose   pipe required) with a standard of 2.5 bar flow pressure, Piped as close to   the unit as possible at a comfortable height from the ground. A gate valve is   required for maintenance. Inlet: Hot water supply shall be 3/4 service line,   pipe as close to the unit as possible at a comfortable height from the ground   with a pressure resistant hose pipe. A gate valve is required to connect an   electrical valve 24VAC. The connection to the Hydro Extractor requires 3/4   piping size
Water Consumption App   20 litres per minute
Sewer Outlet 50MM   DIAM Waste line with siphon to avoid odours
Electrical Connection Power   Input of the unit; 3.9kw
The   Unit Requires a 400V 3ph 50hz Power supply
The   unit requires to be connected to a grounded, permanent wiring system, through   an electrical wall interlocked socket with 4 wires (3ph & earth). 16Amp   fuse required
Recommendation:   We suggest protecting the power lines upstream of the electrical socket with   suitable fuses and magnothermic switches

 specification can change without prior notice