FOOD WASTE PROCESSING STATION A COMPACT HIGH CAPACITY FOOD WASTE REDUCTION & DEWATERING UNIT
HOW IT WORKS
The food wastes are added to the hopper by the operator, the integrated food waste disposer shreds the food waste into tiny particles, the foods with a flow of water are pumped to the Dehydra Hydro Extractor, where through centrifugal action, the WasteStation forces out the excess liquid from the macerated waste. This “grey water” is fed directly to drain, the resulting solid fraction of the food waste is collected in small, easily managed, lidded bins, ready for onward processing. The Food Waste Processing station incorporates both self cleaning and self rinse of the dewaterer, to reduce the build up of food residues, intelligent sensor to detect when the food waste collection caddy is full, PLC Controls with visual aid for noisy environments.
TECHNICAL SPECIFICATION
Disposer | 2.2kw |
Pump & Geared Motor | 0.55kw |
Hydro Exctractor Dehydra | 1.1kw |
ACC Feed (3ph 4wire) | 380-415V 16A |
Water Connection | Hot & Cold |
Waste Water Connection | Required @ outlet height of 150mm & 54mm diameter |
Weight | 190kgs |
Overall Dimensions | 1000W x 700D x 900H |
Feed Opening Dimensions | 530W x 350H |
Capacity | Up to 700kgs per hour |
1400 covers per hour | |
INSTALLATION INFORMATION |
|
Water Connection | Inlet: Cold water supply to disposer shall be 3/4 service line (pressure resistant hose pipe required) with a standard of 2.5 bar flow pressure, Piped as close to the unit as possible at a comfortable height from the ground. A gate valve is required for maintenance. Inlet: Hot water supply shall be 3/4 service line, pipe as close to the unit as possible at a comfortable height from the ground with a pressure resistant hose pipe. A gate valve is required to connect an electrical valve 24VAC. The connection to the Hydro Extractor requires 3/4 piping size |
Water Consumption | App 20 litres per minute |
Sewer Outlet | 54MM DIAM Waste line with siphon to avoid odours |
Electrical Connection | Power Input of the unit; 3.9kw |
The Unit Requires a 400V 3ph 50hz Power supply | |
The unit requires to be connected to a grounded, permanent wiring system, through an electrical wall interlocked socket with 4 wires (3ph & earth). 16Amp fuse required | |
Reccomendation: We suggest protecting the power lines upstream of the electrical socket with suitable fuses and magnothermic switches |
specification can change without prior notice